On Board Chargers small - 5, 6, 10, 12, 15 amp

Mounts on all industrial equipment. Small and compact. Vibration resistant. Single LED gives charge status. 3 YEAR WARRANTY ON 10 AMP UNITS, ONE YEAR ON 5 AMP.

NOTE: As a general rule when selecting charger, the amp rating should be approximately 10% of the amp hour rating of battery.

Charge Profiles:

NOTE: 2 and 5 amp models are available in float only. 5 amp model is OBECB12v/5A

Float: Regulates the battery voltage at 2.3 volts per cell. Best for starting batteries, and gel's

Gas & timed shut off: Timer trips at 2.3 gassing threshold. Batteries are allowed to gas to a maximum of 2.55 volts per cell before shut off. Best for deep cycle batteries

Gas & float: Timer trips at 2.3 gassing threshold. Batteries are allowed to gas to a maximum of 2.55 volts per cell before dropping into indefinite float of 2.26 volts per cell. Best for deep cycle batteries that may see long periods of inactivity.

AGM: Timer trips at 2.3 gassing threshold. Batteries are allowed to gas to a maximum of 2.4 volts per cell before dropping into indefinite float of 2.26 volts per cell. Best for AGM batteries.

Not sure which is the right profile for you? Call us 800 658-2841